Cart is empty (0)

MP2570 | Dual Channel Studio Grade Mic Preamp in a Single 500 Slot

Save The Money and Space in 500 Rack

2 Independent Mic Preamps in a Single 500 Space

VERUM’70 Discrete Studio Grade Mic Preamps

Ultra Low Noise Performance of EIN: -128dBu

Ultra Low Distortion at High Gain Level

NOS Germanium Transistors Saturation FX Circuit

Musical Response with Hi Fidelity and Detailes Preservation

Gain Range from +12dB to +65dB

Texas Instruments Pro-Grade Opamps

On-Board Voltage Regulators and Filters

DIY KIT / Fully Assembled Module

Limited Number of Modules Available!

Order MP2570!

Brand new, fully assembled, tested and ready to use device or DIY KIT.
Shipping to EU, UK, Canada, Australia, USA from 9.99USD!
Dispatched from European Union within 3-5 working days.
Orders from USA bellow 800USD are custom free.

From: 299USD 219USD

Select Your Option :

Your cart is empty
Visit The Shop

Save Money and Space in Your 500 Rack!

Normally, If you wish to record the signal from two microphones simultaneously you would have to use 2 Mic Preamps and 2 slots in 500 rack. Which means spending twice more money on preamps and wasting valuable space in expensive 500 rack.

MP2570 solves this problem! MP2570 offers 2 independent mic preamp channels in a single 500 rack slot.

You are saving the money Twice! First on the Preamp and then again on the 500 rack space!

The adapter provided with the MP2570 preamplifier converts the standard output of the 500 Rack to additional input.

Outputs of both channels are available on the front panel via the TRS Jack sockets.

Suitable for Processing The Line Level Signals

The MP2570 can easily handle the Stereo Line Level Signals!

Simply reduce the level from the source such as DAW Interface by -12dB or more and use the Mic Input as the Line Input.

The PAD function in any Mic Preamp is a simple resistor divider which will increase the noise flor level.

It was used in old recording equipment due to the lack of better technical solution.

In modern studio almost any interface has the output level knob which can be used to reduce the output level. Same can be done in any sound editing software.

Two Independent Microphone Channels in a Single 500 Rack Slot!

MP2570 is the Studio Grade Dual Channel Microphone Preamplifier capable of recording from two different sources simultaneously using only a single 500 rack space.

MP2570 is the perfect addition to any 2 channel DAW interface. You can record anything from the simple guitar + vocal arrangement, record the same source with two different microphones or create the stereo recording.

– Use the condenser and dynamic mics simultaneously. Record different tones of both mics and create the perfect sound.

– Record the sound of the instrument + room ambience sound to achieve the rich and natural results.

      Mono Guitar T.Bone SC140 MP2570 DRY
      Mono Guitar RODE NT2-A (Figure of 8) MP2570 DRY
      Stereo M-S Mixdown of both Microphones MP2570 DRY

NOS Germanium Transistors from 60’s!

Each Channel of the MP2570 is equipped with the Special Saturation FX Circuitry made with Vintage Silicon and Germanium Transistors.

This uniquely designed FX circuitry emulates the more-gain / more-drive behavior of the Classic Mic Preamps.

Modern ultra-clean studio preamps deliver the same boring sound regardless how much gain has been applied.

MP2570 has on-board switchable FX Transistor Circuitry which enriches the signal with variety of harmonics produced by Discrete Vintage Germanium and Silicon components.

More gain means more harmonics! Just like in Vintage Recording Preamps.

The FX Circuitry uses Real NOS Germanium transistors from 60’s!

      Female Vocal MP2570 DRY
      Female Vocal MP2570 FX CIRCUIT
Sample recorded with AKG C214 Microphone.

Make Flawless Recordings with MP2570 Studio Grade Microphone Preamplifier!

MP2570 uses newly design VERUM’70 Discrete Input Preamplifier circuitry, providing ultra low noise and no-compromise THD performance.

VERUM’70 Preamplifier delivers Musical Response and Pristine Details Reproduction.

MP2570 with the VERUM’70 will satisfy even the most demanding users. Balanced tonal response and clarity with the little bit of Grain and Coloration will match almost any recording application.

The use of the Discrete Transistors input stage ensures the Ultra Low Noise performance of EIN=-128dBu at gain of +65dB.

MP2570 is the must have preamp and it will prove to be extremely useful recording tool for any studio environment!

More Audio Samples

      Male Vocal Interface Only
      Male Vocal MP2570 DRY
      Male Vocal MP2570 FX Circuit
      Acoustic Guitar Interface Only
      Acoustic Guitar MP2570 DRY
      Acoustic Guitar MP2570 FX Circuit

AKG C214 VS T.BONE SC1100 Comparison Test Video – Recorded with MP2570


THD + N Performance:
Gain 12dB: 0.0049% @ 1kHz
Gain 35dB: 0.012% @ 1kHz
Gain 65dB: 0.091% @ 1kHz
Note: FX Germanium Saturation circuit disabled.

Noise Performance – 150R input noise source:
Noise flor @ 12dB of Gain: -94dBu
EIN: -128dBu @ 65dB of Gain

Frequency response:
Gain 6dB: -0.2dB@10Hz / -0.1dB@22kHz / -2dB@63kHz
Gain 35dB: -0.2dB@10Hz / -0.2dB@22kHz / -2dB@61kHz
Gain 65dB: -0.3dB@10Hz / -0.3dB@22kHz / -2dB@59kHz

Power Consumption:
Up to 40mA. Compatible with any 500 rack / chassis.



UK, EU, Canada, Australia, USA from 9.99USD!
Dispatched within 3-5 working days. All items shipped from EU.

USA orders bellow 800USD are free from custom fee.

About Bart HRK

About Bart HRK

Analogue Design Engineer

Bart Hrk is an Analogue Design Engineer with extensive knowledge in designing analogue studio recording equipment based on discrete transistors and thermionic valves.

He is the IPC-CID (Certified Interconnect Designer) since 2014. He gained his skills during many years of designing the professional audio products as the freelancer and while working for some of the well-known companies in the pro-audio industry.

During that time he amassed his professional experience in developing projects from the product specification initial concept, through the prototyping stage towards manufacturing and mass production.

His overall know-how includes designing bespoke analogue audio circuitry, audio transformers, PCB layout development, hardware development and prototyping, project leading and management.

Professional Career History

FOCUSRITE Audio Engineering LTD – High Wycombe, Bucks, UK
October 2010 – July 2013
Design Engineer | R&D
Projects: ISA2 Microphone Preamplifier, RED1 500 Microphone Preamplifier

AMS-NEVE LTD – Burnley, Lancashire, UK
May 2009 – September 2010
Analogue Design Engineer | R&D
Projects: 1073LB Microphone Preamplifier, 2264 Compressor